18 Jul Installation Tip for Vertical pole (Click)
Posted at 07:27h
in troubleshooting
▶ Installation Tip for PrinceHanger (Vertical Pole(s))
1. Pull the upper pole slightly upward until the ceiling mount touches the ceiling.
2. Mark it with a pencil as shown in the video.
3. Push the upper pole to the ceiling as hard as you can. Make sure to have a gap about 0.6~1 inch (15~25mm) between the marked line and the One-Touch Fixture.
※ If the marked line is too low or is not visible, pull the upper pole against the ceiling firmly to check if it is assembled properly.
★ After installation of the vertical pole(s), please make sure to fasten the safety bolt(s).